All of our prints are created using the DTG (Direct to Garment) method – an eco-friendly technology that uses water-based,
non-toxic inks to achieve beautiful,
long-lasting colours without excess chemicals or waste.To keep your piece looking great for a long time, treat it with care ♡
Wash the garment separately for the first time, as slight color bleeding may occur.
long-lasting colours without excess chemicals or waste.To keep your piece looking great for a long time, treat it with care ♡
Wash the garment separately for the first time, as slight color bleeding may occur.
WASH INSIDE OUT AT LOW TEMPERATURE
The drum of the washing machine rubbing against the print acts like sandpaper in slow motion, micro-damage accumulates with every wash.
MAX. 30°C AND MAX. 600/800 RPM, delicate cycle
Higher temperatures cause the fibres around the DTG ink to contract, leading to cracking and peeling of the print. In the case of acid wash fabric, it accelerates the further deterioration of already weakened fibres — the garment frays faster, develops worn patches, and loses its shape.
DO NOT USE BLEACH, VINEGAR OR STAIN REMOVERS
Aggressive enzymes in cheap detergents literally digest the ink layer. OXI powders and chlorine act like a mild bleach — the print starts to fade after just 2–3 washes, and acid wash fabric loses its characteristic effect, becoming uniformly faded and losing all of its charm.
DO NOT TUMBLE DRY
This is the biggest enemy of both types of garment. Hot air and the mechanical tumbling action at high temperature shrinks the fabric, cracks the print, and distorts the cut. The result? The garment looks like it’s been worn for 5 years after just a few washes.
DO NOT IRON DIRECTLY OVER THE PRINT
Never iron directly on the print. High heat scorches the ink layer — the print becomes dull, stiff, and starts to crack. If you must iron: reverse side, through a cotton cloth, low temperature.
